U-Boot SPL 2012.07 (Sep 27 2012 - 06:14:27) OMAP4430 ES2.2 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.07 (Sep 27 2012 - 06:14:27) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 SD/MMC found on device 0 reading uEnv.txt 271 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... reading uInitrd 12346733 bytes read reading uImage 3781048 bytes read ## Booting kernel from Legacy Image at 80300000 ... Image Name: 3.6.1-1.fc18.armv7hl.omap Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3780984 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12346669 Bytes = 11.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.178344] CPU1: Unknown IPI message 0x0 [ 0.191833] gpmc: irq-52 could not claim: err -22 [ 0.196929] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.196960] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.211639] omap_init_sham: platform not supported [ 0.211639] omap_init_aes: platform not supported [ 1.867553] voltdm_scale: No voltage scale API registered for vdd_mpu [ 2.029510] Power Management for TI OMAP4. [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Basic System. Welcome to Fedora 18 (Spherical Cow)! Expecting device dev-ttyO2.device... [ OK ] Listening on Syslog Socket. [ OK ] Reached target Syslog. [ OK ] Reached target Remote File Systems. Starting Collect Read-Ahead Data... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Listening on Device-mapper event daemon FIFOs. [ OK ] Reached target Encrypted Volumes. Mounting POSIX Message Queue File System... Mounting Debug File System... [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point. Starting Software RAID Monitor Takeover... Expecting device dev-disk-by\x2duuid-07d6ad51\x2d460...81805.device... [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... Starting udev Kernel Device Manager... Starting Configure read-only root support... Expecting device dev-disk-by\x2duuid-EF54\x2d0C9F.device... [ OK ] Started Collect Read-Ahead Data. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started Software RAID Monitor Takeover. Starting Load legacy module configuration... Starting Remount Root and Kernel File Systems... Starting Load Kernel Modules... Starting Setup Virtual Console... Starting Apply Kernel Variables... G[ OK ] Stopped Trigger Flushing of Journal to Persistent Storage. Stopping Journal Service... [ OK ] Stopped Journal Service. Starting Journal Service... [ OK ] Started Journal Service. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Configure read-only root support. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Load legacy module configuration. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Apply Kernel Variables. Mounting Configuration File System... [ OK ] Reached target Local File Systems (Pre). Mounting Temporary Directory... Starting Load Random Seed... Starting udev Wait for Complete Device Initialization... [ OK ] Mounted Temporary Directory. [ OK ] Mounted Configuration File System. [ OK ] Started Load Random Seed. [ OK ] Found device /dev/ttyO2. [ OK ] Found device /dev/disk/by-uuid/EF54-0C9F. Mounting /boot/uboot... [ OK ] Started udev Wait for Complete Device Initialization. Starting Wait for storage scan... [ OK ] Found device /dev/disk/by-uuid/07d6ad51-4602-4e36-bf7c-d7b9e2a81805. Activating swap /dev/disk/by-uuid/07d6ad51-4602-4e36...d7b9e2a81805... [ OK ] Mounted /boot/uboot. [ OK ] Activated swap /dev/disk/by-uuid/07d6ad51-4602-4e36-bf7c-d7b9e2a81805. [ OK ] Reached target Swap. [ OK ] Started Wait for storage scan. Starting Initialize storage subsystems (RAID, LVM, etc.)... [ OK ] Started Initialize storage subsystems (RAID, LVM, etc.). Starting Initialize storage subsystems (RAID, LVM, etc.)... [ OK ] Started Initialize storage subsystems (RAID, LVM, etc.). [ OK ] Reached target Local File Systems. Starting Recreate Volatile Files and Directories... Starting Trigger Flushing of Journal to Persistent Storage... Starting Tell Plymouth To Write Out Runtime Data... [ OK ] Started Trigger Flushing of Journal to Persistent Storage. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Recreate Volatile Files and Directories. [ OK ] Reached target System Initialization. Starting Console System Startup Logging... [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting firewalld - dynamic firewall daemon... Starting NTP client/server... Starting Root Filesystem Auto-Resizer... Starting Security Auditing Service... Starting irqbalance daemon... Starting Initialize hardware monitoring sensors... Starting Self Monitoring and Reporting Technology (SMART) Daemon... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting ABRT Automated Bug Reporting Tool... [ OK ] Started ABRT Automated Bug Reporting Tool. Starting Install ABRT coredump hook... Starting ABRT Xorg log watcher... [ OK ] Started ABRT Xorg log watcher. Starting ABRT kernel log watcher... [ OK ] Started ABRT kernel log watcher. Starting Harvest vmcores for ABRT... Starting Login Service... Starting Permit User Sessions... Starting System Logging Service... [ OK ] Started System Logging Service. Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Console System Startup Logging. [ OK ] Started Security Auditing Service. [ OK ] Started irqbalance daemon. [ OK ] Started Install ABRT coredump hook. [ OK ] Started Harvest vmcores for ABRT. Starting Command Scheduler... [ OK ] Started Command Scheduler. [ OK ] Started Permit User Sessions. Starting Job spooling tools... [ OK ] Started Job spooling tools. Starting Wait for Plymouth Boot Screen to Quit... Starting Terminate Plymouth Boot Screen... [FAILED] Failed to start Initialize hardware monitoring sensors. See 'systemctl status lm_sensors.service' for details. [ 29.329132] systemd[1]: bus_connection_get_unix_fd failed Broken pipe [ 29.335998] systemd[1]: Failed to get caller's security context on: Broken pipe [ OK ] Started Show Plymouth Reboot Screen. [ OK ] Started Console System Reboot Logging. [ OK ] Unmounted /boot/uboot. [ OK ] Unmounted Temporary Directory. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Local File Systems (Pre). Stopping Remount Root and Kernel File Systems... [ OK ] Stopped Remount Root and Kernel File Systems. Starting Update UTMP about System Runlevel Changes... Starting Save Random Seed... Stopping Collect Read-Ahead Data... [ OK ] Started Save Random Seed. [ OK ] Stopped Collect Read-Ahead Data. [ OK ] Reached target Shutdown. Sending SIGTERM to remaining processes... Sending SIGKILL to remaining processes... Hardware watchdog 'OMAP Watchdog', version 0 Unmounting file systems. Unmounted /sys/kernel/config. Unmounted /sys/kernel/debug. Unmounted /dev/mqueue. Disabling swaps. Detaching loop devices. Detaching DM devices. [ 37.959564] Restarting system. U-Boot SPL 2012.07 (Sep 27 2012 - 06:14:27) OMAP4430 ES2.2 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.07 (Sep 27 2012 - 06:14:27) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 SD/MMC found on device 0 reading uEnv.txt 271 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... reading uInitrd 12346733 bytes read reading uImage 3781048 bytes read ## Booting kernel from Legacy Image at 80300000 ... Image Name: 3.6.1-1.fc18.armv7hl.omap Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3780984 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12346669 Bytes = 11.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.178375] CPU1: Unknown IPI message 0x0 [ 0.191894] gpmc: irq-52 could not claim: err -22 [ 0.196990] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.197021] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.211669] omap_init_sham: platform not supported [ 0.211700] omap_init_aes: platform not supported [ 1.859741] voltdm_scale: No voltage scale API registered for vdd_mpu [ 2.029296] Power Management for TI OMAP4. [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Basic System. Welcome to Fedora 18 (Spherical Cow)! Expecting device dev-ttyO2.device... [ OK ] Listening on Syslog Socket. [ OK ] Reached target Syslog. [ OK ] Reached target Remote File Systems. Starting Collect Read-Ahead Data... Starting Replay Read-Ahead Data... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Listening on Device-mapper event daemon FIFOs. [ OK ] Reached target Encrypted Volumes. Mounting POSIX Message Queue File System... Mounting Debug File System... [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point. Starting Software RAID Monitor Takeover... Expecting device dev-disk-by\x2duuid-07d6ad51\x2d460...81805.device... [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... Starting udev Kernel Device Manager... Starting Configure read-only root support... Expecting device dev-disk-by\x2duuid-EF54\x2d0C9F.device... [ OK ] Started Collect Read-Ahead Data. [ OK ] Started Replay Read-Ahead Data. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started Software RAID Monitor Takeover. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Configure read-only root support. Starting Load legacy module configuration... Starting Remount Root and Kernel File Systems... Starting Load Kernel Modules... Starting Setup Virtual Console... Starting Apply Kernel Variables... G[ OK ] Stopped Trigger Flushing of Journal to Persistent Storage. Stopping Journal Service... [ OK ] Stopped Journal Service. Starting Journal Service... [ OK ] Started Journal Service. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Load legacy module configuration. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Apply Kernel Variables. Mounting Configuration File System... [ OK ] Reached target Local File Systems (Pre). Mounting Temporary Directory... Starting Load Random Seed... Starting udev Wait for Complete Device Initialization... [ OK ] Mounted Temporary Directory. [ OK ] Mounted Configuration File System. [ OK ] Started Load Random Seed. [ OK ] Found device /dev/ttyO2. [ OK ] Found device /dev/disk/by-uuid/EF54-0C9F. Mounting /boot/uboot... [ OK ] Found device /dev/disk/by-uuid/07d6ad51-4602-4e36-bf7c-d7b9e2a81805. Activating swap /dev/disk/by-uuid/07d6ad51-4602-4e36...d7b9e2a81805... [ OK ] Mounted /boot/uboot. [ OK ] Activated swap /dev/disk/by-uuid/07d6ad51-4602-4e36-bf7c-d7b9e2a81805. [ OK ] Started udev Wait for Complete Device Initialization. Starting Wait for storage scan... [ OK ] Reached target Swap. [ OK ] Started Wait for storage scan. Starting Initialize storage subsystems (RAID, LVM, etc.)... [ OK ] Started Initialize storage subsystems (RAID, LVM, etc.). Starting Initialize storage subsystems (RAID, LVM, etc.)... [ OK ] Started Initialize storage subsystems (RAID, LVM, etc.). [ OK ] Reached target Local File Systems. Starting Recreate Volatile Files and Directories... Starting Trigger Flushing of Journal to Persistent Storage... Starting Tell Plymouth To Write Out Runtime Data... [ OK ] Started Trigger Flushing of Journal to Persistent Storage. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Recreate Volatile Files and Directories. [ OK ] Reached target System Initialization. Starting Console System Startup Logging... [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting firewalld - dynamic firewall daemon... Starting NTP client/server... Starting Root Filesystem Auto-Resizer... Starting Security Auditing Service... Starting irqbalance daemon... Starting Initialize hardware monitoring sensors... Starting Self Monitoring and Reporting Technology (SMART) Daemon... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting ABRT Automated Bug Reporting Tool... [ OK ] Started ABRT Automated Bug Reporting Tool. Starting Install ABRT coredump hook... Starting ABRT Xorg log watcher... [ OK ] Started ABRT Xorg log watcher. Starting ABRT kernel log watcher... [ OK ] Started ABRT kernel log watcher. Starting Harvest vmcores for ABRT... Starting Login Service... Starting Permit User Sessions... Starting System Logging Service... [ OK ] Started System Logging Service. Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Console System Startup Logging. [ OK ] Started Security Auditing Service. [ OK ] Started irqbalance daemon. [ OK ] Started Install ABRT coredump hook. [ OK ] Started Harvest vmcores for ABRT. [ OK ] Started Permit User Sessions. [FAILED] Failed to start Initialize hardware monitoring sensors. See 'systemctl status lm_sensors.service' for details. Starting Job spooling tools... [ OK ] Started Job spooling tools. Starting Wait for Plymouth Boot Screen to Quit... Starting Terminate Plymouth Boot Screen... Starting Command Scheduler... [ OK ] Started Command Scheduler. Fedora release 18 (Spherical Cow) Kernel 3.6.1-1.fc18.armv7hl.omap on an armv7l (ttyO2) panda-f18-v7hl login: [ 137.443298] BUG: scheduling while atomic: swapper/0/0/0x40000300 [ 137.453186] BUG: scheduling while atomic: swapper/0/0/0x40000100